Showing posts with label write. Show all posts
Showing posts with label write. Show all posts
Monday, January 9, 2017
Free Download J110f write Cert done
Free Download J110f write Cert done
HERE LOG
Code:
Welcome to Octoplus/Octopus Box Samsung software version 2.1.4 ----------------------------------------------------------------------------------- To connect SM-J110F phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->More->About Device. 3.Tap on "Build number" 7 times to enable developer options. 4. Go to Menu->Settings->More->Developer options. 5. Turn on "USB Debugging" option. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM1 Selected model: SM-J110F Detected phone model: SM-J110F Firmware compiled date: Fri Jul 31 21:19:09 KST 2015 PDA version: J110FXXU0AOGE CSC version: J110FXFV0AOH1 SW version: J110FXXU0AOGE Phone IMEI: 352565071948158 Phone SN: R58GA0EBGYW Android version: 4.4.4 (KTU84P) Cheking Root Phone is Rooted Preparing... Writing Certificate... Selected file: E:BLFilesoctopus lock crtCert-SM-J110F- 35256507194815-R58GA0EBGYW.cert Checking Certificate file... Certificate file successfully checked Finalizing... Certificate has been written successfully Please, restart the phone to apply changes
Available link for download
Tuesday, November 22, 2016
If the phone ready to read and write again please re plug the USB or reset the pinouts
If the phone ready to read and write again please re plug the USB or reset the pinouts
If you are getting this (If the phone ready to read and write again, please re-plug the USB or reset the pinouts) error on Volcano Tool, then just follow the steps below to solve the problem. Just check the error log below of volcano tool while operating with MSTAR Tab. This phone has SPD SC6531 CPU so you get this error, if you try to read flash or any other operation with Mstar tab.
MSTAR Error on Volcano Tool
Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Detection D+/D- with 1.05 seconds.
Continue to detect BOOT pin...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
BOOT(Pull Down) = 4
Setting...
Find USB device:SCI USB2Serial (COM34), (VID_1782&PID_4D00)
Pinouts setting complete!
If the phone ready to read and write again, please re-plug the USB or reset the pinouts.
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Detection D+/D- with 1.05 seconds.
Continue to detect BOOT pin...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
BOOT(Pull Down) = 4
Setting...
Find USB device:SCI USB2Serial (COM34), (VID_1782&PID_4D00)
Pinouts setting complete!
If the phone ready to read and write again, please re-plug the USB or reset the pinouts.
If you get this error then just try to flash the phone using SPD tab, because the phone has SPD CPU and you are wrongly operate with MSTAR tab. Here is the example of Karbonn K595 which has a SPD SC6531 CPU but Some of the Karbonn K595 has Mstar CPU, so if you are getting this error then try with SPD tab SC6531.
 |
| Karbonn K595 Flashing Error Using Volcano Tool with MSTAR Tab |
Check the above image, the phone has successfully flash with volcano tool using SPD tab, because the phone has SPD SC6531 CPU.
Available link for download
Subscribe to:
Posts (Atom)